After years of nationwide feedback from contractors and customers, we’ve curated our Artificial Turf Supply Detailed Installation Guide with a wealth of knowledge to ensure you have all the information you need to achieve a flawless-looking and successful artificial grass installation.
From professional installs to learning how to self-install your turf product, we’re addressing all installation challenges and offering the latest tips and techniques to save you time and money.
Whether you’re a seasoned DIY enthusiast or a first-time installer, we aim to empower you with the expertise needed to transform your backyard haven.
Join us as we guide you through installing artificial grass, and get ready to enjoy a low-maintenance and vibrant lawn that will stand the test of time.
Planning Your Turf Project
Transforming your outdoor space with artificial turf is a project within reach for most DIY enthusiasts. This guide will lead you through a streamlined process, from initial planning to the final touches of laying down your artificial grass.
Proper planning is vital to a smooth installation. Here’s what to consider before diving in:
| Task | Details |
| Project Size | Typically, areas under 1,500 square feet can be completed within 2-3 days. |
| Weather Conditions | Installation should only be carried out in temperatures above 50 degrees Fahrenheit. |
| Tools Required | Various tools are needed; power tools can make the process more efficient, though they are not mandatory. |
| Turf Dimensions | Standard rolls come in 15 feet widths. Calculate the area width x length based on 15-foot widths, allowing extra for seaming and trimming. |
| Seams | Aim to have as few seams as possible for a seamless, natural appearance. |
When planning your DIY artificial turf installation, consider the project’s scale—areas under 1,500 square feet typically take 2 to 3 days to complete.
Optimal installation conditions require temperatures above 50 degrees Fahrenheit. Ensure you have all the necessary tools, noting that while power tools aren’t crucial, they can make the process smoother.
Remember that turf rolls are 15 feet wide, so plan your area accordingly and allow extra turf for seaming and trimming. Minimizing seams will enhance the natural look of the turf.
How to Prepare the Ground for Installation
- Remove Vegetation: Use a sod cutter, hoe, or shovel.
- Clear the Area: Eliminate large rocks or roots.
- Weed Barrier: Lay down if needed and secure with sod staples.
- Gopher Wire: Install if using.
- Base Material: Mix 3/4″ down to 1/4″ crushed drain rock for solid drainage.
To prepare the ground, start by removing any existing vegetation and clearing the area of debris. If necessary, install a weed barrier to prevent future growth, securing it in place with sod staples.
For enhanced protection, particularly in gopher-prone areas, lay down gopher wire. Finally, spread a base material that facilitates good drainage, typically a mix of 3/4″ to 1/4″ crushed drain rock.
Installing Artificial Turf
- Roll Out Turf: Do this over a clean, flat surface.
- Seaming: Ensure the turf pieces have the blades in the same direction and seam carefully.
- Trimming: Custom-fit your turf to the space.
- Infill Application: Use antimicrobial-coated sand for a natural look and odor prevention.
- Brooming: Brush the turf to stand up the blades and settle the infill.
First, roll out the turf on a clean and flat surface. When seaming multiple rolls, ensure the blades of turf run in the same direction for uniformity.
Trim the turf to fit your designated area precisely.
Apply a layer of antimicrobial-coated sand as an infill to help the grass stand up and to prevent odors.
Finally, use a broom or similar tool to brush the blades upright and ensure the infill settles appropriately, giving your new lawn a lush, natural appearance.
Learn more:
